Customizable finned evaporator coil radiator

Finned evaporator condenser, industrial finned heat exchanger, for steam heating in thermal station, special for freezer and cold room

Introduction: It consists of aluminum fins and condensing heat exchanger tubes, which use air to dissipate heat to cool the gaseous refrigerant so that it can be condensed into a liquid state to maintain the refrigeration system cycle, which determines the energy-efficiency ratio of the air-cooled chiller unit.

Selected high-quality galvanized steel quality
High purity copper/steel tubes, corrosion-resistant and not easy to break.

Finned evaporator is mainly used for drying system air heating, is the main equipment in the hot air device, radiator using the hot medium can be steam or hot water, can also be used for thermal oil, steam working pressure is generally not more than 0.8Mpa, the temperature of the hot air in the following 150, finned radiator is mainly by the air flow between the three rows of side-by-side spiral finned tube bundles, the heat dissipation fins bundles of the process is the reverse 0.5 * 10 mm steel strip with mechanical winding method, around the seamless steel tube, and then hot-dip galvanized, stainless steel tubes and stainless steel can also be used to make all stainless steel band radiator, SRL-type radiator is rolled with steel tubes and aluminum finned radiator

SRL type radiators are finned radiators rolled with steel pipes and aluminum strips, and the heat dissipation area per unit length is larger than that of SRZ type radiators. Because of the mechanical winding, cooling fins and cooling tube contact surface is large and tight, heat transfer performance is good, stable, air through the resistance is small, steam or hot water flow through the steel tube, heat through the tightly wound fins on the steel tube to the air through the fins to achieve the role of heating and cooling the air.